Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Salt Lake City?
Chimney repair in Salt Lake City typically runs $275 to $1,800, with most common fixes landing in the $350 to $750 range. A small crown patch or minor mortar repair sits near the low end, while a full stainless-steel reline with a new cap can push past $1,800. The written estimate sets the final number, and it’s free to get one.
What you pay depends on what’s actually failing. A cracked crown gets patched. A crumbling flue gets resurfaced. A rusted-out liner gets replaced. Those are three very different jobs, and a technician who can do all three will tell you which one you’re looking at before any money changes hands.
We’re Forge Chimney Cleaning, and we do all three: chimney sweep, chimney repair, and dryer vent cleaning. When we quote a repair, we’re quoting the trade-grade materials that hold up in Salt Lake’s freeze-thaw cycles, not the hardware-store patch that fails by the next spring. Call (833) 497-1153 for a free estimate. We answer 24/7.
What’s a Typical Chimney Repair Price in Salt Lake City?
Most single-repair visits land between $350 and $750. That covers the common stuff: a cracked crown, a spalled brick or two, a failed cap, mortar joints that have given up. If the flue interior is scored and dropping material, you’re into resurfacing territory. If the liner itself has failed, you’re into relining. The estimate tells you which. There’s no charge to find out.
Chimney Repair Cost Breakdown (2026)
Here’s how repair costs break down in the Salt Lake City market. These are typical ranges based on the work involved, not a menu of flat rates. Every chimney is different, and the written estimate you get reflects yours.
| Repair Type | Typical Cost Range | What It Involves |
|---|---|---|
| Crown repair or rebuild | $225 – $650 | Patching hairline cracks up to a full crown replacement with proper slope and overhang |
| Brick and mortar repair (tuckpointing) | $300 – $900 | Grinding out failed mortar and repacking joints; replacing spalled brick |
| Flue resurfacing (HeatShield) | $600 – $1,400 | Resurfacing a scored or damaged flue interior to restore a smooth, sealed surface |
| Chimney relining (DuraFlex stainless) | $1,200 – $1,800 | Installing a new flexible stainless liner sized to the appliance |
| Chimney cap installation | $150 – $450 | Fitting a cap and screen to keep rain, animals, and debris out |
| Flashing repair | $250 – $600 | Resealing or replacing the metal where the chimney meets the roof |
| Damper replacement | $200 – $500 | Swapping a rusted or stuck damper for a working top-seal or throat damper |
| Full sweep and inspection | $150 – $300 | Cleaning the flue and documenting condition with photos |
These categories overlap in practice. A chimney with a cracked crown usually has water-damaged mortar too. A failed liner usually means the flue behind it is scored. That’s why one repair often leads to a slightly bigger scope once we get eyes on it. We show you what we find and price it before anything starts.
What pushes a price up: height and roof access, the number of flues, the condition of the masonry, and whether we’re working on a wood-burning fireplace, a gas insert, or a boiler flue. A chimney on a steep Salt Lake City roofline takes more setup than a short one on a flat run. What pulls it down: catching damage early, before water has had a winter or two to work into the brick.
What Affects Chimney Repair Pricing in Salt Lake City
Salt Lake City sits in a mountain valley with cold winters and a real freeze-thaw cycle. That shapes what fails and when. Here’s what moves the number on your estimate:
- Water and freeze-thaw damage. Salt Lake City winters drive moisture into masonry, then freeze it, then thaw it. That cycle spalls brick faces and cracks mortar joints. The more winters a chimney has been through unprotected, the more repair it needs.
- Chimney height and roof pitch. A tall flue above a steep roof takes more setup, more ladder work, and sometimes more than one trip. That’s a cost factor in the Avenues and Federal Heights, where homes often sit on sloped lots with chimney stacks that climb well above the roofline.
- Flue condition and liner type. A clay tile flue that’s still intact is a cheaper fix than one that’s cracked and needs resurfacing or a full stainless reline. The condition of the interior drives the biggest swing in price.
- Appliance type. A wood-burning fireplace, a gas insert, and a furnace flue all need different liner sizing and different venting. Getting the liner matched to the appliance is part of the work, and it affects cost.
- Number of flues. Older Salt Lake City homes sometimes have two flues in one stack, one for the fireplace and one for the furnace or water heater. Two flues mean two liners to inspect and potentially two repairs.
- Age of the masonry. Brick from the early- and mid-century homes common in Sugar House and the East Bench often needs tuckpointing before anything else can be done. The mortar goes first, and it takes the brick with it if you leave it.
One more local note: Salt Lake Valley air quality rules affect what you can burn and when, and that’s worth knowing if you heat with wood. We don’t set those rules, but we do get asked about them, and a technician who understands the local fireplace landscape will tell you straight rather than guess.
Repair or Replace: Which Costs Less Over Time?
Repair usually costs less up front, and it’s the right call when the chimney’s structure is sound and the problem is specific. Replace when the flue is beyond resurfacing, the liner has failed throughout, or the masonry is failing in more than one place. A $650 resurfacing job that buys you years of service beats a $6,000 rebuild if the structure underneath is solid. The trick is knowing which one you’re looking at. That’s what the inspection tells you.
We don’t push replacement when resurfacing will do. And we don’t patch a chimney that needs a liner, because that patch won’t hold. The honest answer is the one you can act on.
How to Save on Chimney Repair in Salt Lake City
There’s no magic discount, but there are real ways to keep the bill down:
- Get the problem found before it spreads. A $225 crown patch beats a $650 crown rebuild. Water damage compounds, and the longer it sits, the more masonry it takes with it.
- Sweep before you repair. Creosote buildup and debris make it harder to see the flue condition and can obscure damage. A clean flue means an accurate diagnosis, and it’s cheaper than guessing.
- Ask what the repair actually protects. If a fix doesn’t stop water or restore the flue, it’s not a repair, it’s a delay. Spend on the thing that holds.
- Get a written estimate before work starts. We give you the price up front. If the scope changes once we’re on the roof, we tell you before we proceed, not after.
- Bundle the dryer vent. If your dryer vent hasn’t been cleaned, a visit that handles both the chimney and the vent saves you a second dispatch. Two of the most overlooked fire hazards in one visit: your chimney and your dryer vent.
The estimate is free. Call (833) 497-1153 and we’ll send a technician. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Materials Matter in a Salt Lake City Chimney Repair
A chimney repair is only as good as what goes into it. We source and install from professional-grade chimney-trade brands: DuraFlex flexible stainless liner systems for relining, HeatShield for flue resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield components for caps, dampers, and the hardware that makes a repair last. Those are the names the trade relies on nationwide.
Why does that matter for your price? A cheap cap rusts through in a few winters. A cheap liner fails at the seam or the connection and you’re back to a leaking flue. Buying the material once is the cheaper path. We specify DuraFlex, HeatShield, and Copperfield because the pros do. Our technicians have up to 15 years of experience, and they know what a repair should look like when it’s done right.
What’s Included in a Chimney Repair Estimate?
A proper estimate starts with an inspection: we look at the crown, the masonry, the flashing, the cap, the damper, and the flue interior, and we document what we find. Then we price the repair in writing. That includes the materials, the labor, and the scope. If we recommend resurfacing with HeatShield or relining with DuraFlex, the estimate says so and explains why. You get the number before anyone climbs the roof.
The inspection isn’t a sales pitch. It’s how we tell you what’s actually wrong. If the chimney only needs a crown patch, that’s what the estimate says. If it needs a liner, we’ll show you the failed flue and explain the fix.
FAQs – Chimney Repair Cost in Salt Lake City
How much does chimney repair cost in Salt Lake City?
Typical chimney repair in Salt Lake City runs $275 to $1,800, with most common repairs in the $350 to $750 range. A small mortar patch is near the bottom; a full reline is near the top. Call (833) 497-1153 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a chimney?
Repair is almost always cheaper up front, often by a wide margin. A resurfacing job at $600 to $1,400 costs far less than a full rebuild. Replacement makes sense only when the structure is failing in multiple places or the liner is beyond repair. The inspection tells you which you’re facing.
How much does chimney relining cost in Salt Lake City?
Relining with a DuraFlex stainless liner typically runs $1,200 to $1,800, depending on flue height, appliance type, and whether the old liner needs removal. Call (833) 497-1153 to get a number for your chimney.
Can you come today?
We offer same-day service when a slot is open. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 497-1153 to schedule.
How much does a chimney sweep cost in Salt Lake City?
A standard sweep and inspection runs $150 to $300, depending on the flue condition and whether you have a wood-burning fireplace or a gas insert. A clean flue makes a repair estimate more accurate, so it’s often worth doing first. Call (833) 497-1153 for a free estimate.
Does chimney repair cost more in winter?
Not from us. The price is set per job by the written estimate, year-round. What does change with winter is the damage: freeze-thaw cycles in the Salt Lake Valley are harder on unprotected masonry, so a small crack in the fall can be a bigger repair by spring. Catching it early saves money.
If you’re in the Salt Lake City area and your chimney needs a look, we’ll tell you what it needs and what it costs. Call (833) 497-1153 for a free estimate. Trade-grade materials, a written price before the work starts, and a repair that holds through the next Salt Lake winter. We sweep, repair, and restore, not just clean and leave.
Pricing reflects the Salt Lake City market as of 2026. Forge Chimney Cleaning offers free estimates. Call (833) 497-1153.
Written by the team at Forge Chimney Cleaning.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Diego Hernandez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Shannon Hayes"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Jodi Miller