Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Midvale
When you burn wood through the coldest weeks in Midvale, you want a sweep who understands what that does to a flue. We do. Our chimney sweep work in Midvale starts with a real inspection, not a quick brush-and-go, and we tell you plainly what we find. Fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to your door. Call (833) 497-1153. We answer 24/7. We know the east-side streets off State Street, the older brick ranches near the center of town, and the newer townhomes along the light-rail corridor, and each one asks something different of a sweep.
Why Midvale Homeowners Call Forge Chimney Cleaning for Chimney Sweep
Most of what brings people to us in Midvale is simple: a stove or insert that has run hard all winter and a flue nobody has looked inside in years. Our technicians have up to 15 years of experience with exactly that situation. We’re licensed and insured, and we work with trade-grade materials, not off-the-shelf substitutes.
We sweep, repair, and restore, not just clean and leave. That matters here more than in most places. When we find a cracked crown, a failed cap, or creosote that has baked into the smoke chamber, we can quote the HeatShield or DuraFlex fix on the same visit instead of handing you a recommendation to chase down with someone else. Midvale homeowners keep calling us back because the diagnosis holds up and the estimate is written before any work starts.
Every visit includes a camera inspection and a photo report you can see for yourself, so nothing gets recommended on a guess. If work can safely wait until next season, we’ll say so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Gas Fireplace Cleaning in Midvale
Gas Fireplace Cleaning in Midvale matters even when there’s no wood smoke to speak of, because a gas fireplace still pulls in dust, pet hair, and the fine grit that valley air carries during inversion weeks. The job covers the burner, the logs or ember bed, the glass, and the venting path behind the unit. We check that the flame pattern is even and clean, that the pilot assembly is clear, and that nothing has quietly blocked the vent.
A Midvale homeowner usually needs this when the glass clouds over, when the flame starts looking lazy or uneven, or when the unit has sat unused through a summer. If you’ve never had the venting checked since you moved in, that’s the other common reason. Gas Fireplace Cleaning in Midvale typically runs $130 to $240, and the written estimate sets the final price.
What the Visit Covers
We pull the glass, clean the firebox interior, clear the burner ports, and check the vent termination outside. We photograph anything worth a closer look so you understand what’s going on before you spend anything further.
When to Book It
Before the first cold snap, ideally, when the fireplace is about to start working again. If the flame has gone yellow or the glass won’t stay clear, book sooner rather than later.
Chimney Maintenance in Midvale
Chimney Maintenance in Midvale is the work that keeps a fire system reliable between sweeps, and it’s the part most homeowners skip. It covers a Level 1 or Level 2 inspection depending on what your setup needs, checking the chimney cap and crown, the flashing where the chimney meets the roof, the damper, and the joints in the masonry. On the east-side streets off State Street, uncapped 1950s clay flues collect bird nests and debris, and the freeze-thaw swings of spring and fall open cracks that let moisture straight into the flue.
Midvale homeowners need maintenance when the chimney has gone a full season without a look, when draft gets sluggish, or when a storm has knocked a cap loose. Chimney Maintenance in Midvale typically runs $95 to $185 for an inspection, with sweep and repair priced separately by the written estimate. Our technicians have up to 15 years of experience, and we use camera inspection and a photo report on every visit so you see the evidence yourself.
Caps, Crowns, and Flashing
An uncapped flue is an open door for birds, rain, and debris. We check the cap, the crown, and the flashing together, since a failure in any one of them puts moisture into the masonry above the firebox.
A Shorter Interval for Primary-Heat Stoves
A wood stove that heats the house all winter loads creosote far faster than an occasional evening fire. Homes running one as primary heat should be swept more often than the once-a-year rule of thumb, and we’ll tell you the interval your flue actually needs based on what we find.
Trusted Brands We Service in Midvale
We specify professional-grade components from DuraFlex, HeatShield, Gelco, and Olympia Chimney because that’s what the trade relies on. When a clay-tile flue in a Midvale home is too damaged for a plain sweep, a DuraFlex liner or HeatShield resurfacing gives us a repair path that holds up. We don’t claim to keep parts on a truck or in a local warehouse; we specify the right component for your flue and turn the work around without a run to the hardware store for a generic substitute. That’s the difference between a patch and a repair that lasts.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Midvale Homes
- Undersized coal-era clay flues serving wood inserts. On the east-side streets off State Street, 1950s clay flues were sized for coal furnaces, not the wood-burning inserts now sitting in front of them. That mismatch shows up as weak draft and smoky backdrafts during inversion weeks.
- Heavy first- to second-degree creosote. When a stove runs as primary heat through the coldest days, the firebox and smoke chamber load up fast. Sweeping on a once-a-year schedule often isn’t enough for that kind of use.
- Uncapped flues full of nests and debris. An open 1950s clay flue off State Street collects bird nests, leaves, and grit over the summer. That blockage is one of the first things we clear before anything else.
- Spalling masonry and cracked crowns. Spring and fall temperature swings crack crowns and open joints, letting moisture into the flue. Left alone, that water works steadily into the masonry.
Pricing for Chimney Sweep in Midvale, UT
A typical chimney sweep in Midvale runs $150 to $290, and that range holds whether you’re in a 1950s brick ranch near the center of town or a newer townhome along the light-rail corridor. A Level 1 inspection sits in the $95 to $185 range. Creosote removal on a primary-heat stove that’s been run hard climbs closer to the top of the sweep range, since heavily loaded fireboxes and smoke chambers take longer to clear. A mid-century flue that needs a draft correction or reline is quoted separately once we’ve seen it. Our estimate is free and the price is set per job by the written estimate, so you know the number before anyone starts. Call (833) 497-1153 for an exact quote.
We Also Serve Cities Near Midvale
We serve homeowners in Midvale and the surrounding towns, including Sandy, Murray, Cottonwood Heights, and White City. If you’re just outside the city line, call and we’ll tell you whether we can reach your address. Delivery and drive time may affect scheduling, but the estimate is still free.
Serving Midvale, UT – Our Local Coverage Area
We serve Midvale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Midvale
We offer fast dispatch from 7am to 7pm, Sunday through Friday, and same-day service is often possible. Call (833) 497-1153. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm, and we do not run on Saturday.
Yes, we cover Midvale from the older brick ranches near the center of town to the newer townhomes along the light-rail corridor. That range matters because the work differs: masonry fireplaces with clay-tile flues on one street, factory-built metal chimneys on the next. We carry the tooling for both.
Yes, we service both, and they’re not the same job. A factory-built metal chimney needs its own inspection path and brush tooling, while a masonry fireplace with a clay-tile flue calls for masonry-specific work. Tell us which you have when you call and we’ll bring the right setup.
A chimney sweep in Midvale typically runs $150 to $290, which lines up closely with Sandy, Murray, Cottonwood Heights, and White City. The main cost driver is creosote load and flue condition, not the city line. Call (833) 497-1153 for an exact quote, and estimates are free.
Our repair and reline work is backed by a satisfaction guarantee, and we spec professional-grade components from HeatShield and DuraFlex where a repair is needed. The written estimate spells out what’s covered before we start. Call (833) 497-1153 to talk through the work on your flue.
If your wood stove or insert has carried the house through another Midvale winter, book a sweep before it carries the next one with more creosote in it. Call (833) 497-1153 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to your door. Our chimney sweep team will show you what’s in the flue and tell you honestly when work can wait.
Written by the team at Forge Chimney Cleaning.