Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Salt Lake City, UT
Chimney repair in Salt Lake City starts with the fact that the house was probably built long before you were. The Avenues, Sugar House, Capitol Hill and Liberty Wells are full of 1890s to 1930s brick bungalows and Victorians with original masonry fireboxes and clay-tile flues, and many of those flues have since been paired with a wood-stove insert. Add the winter inversion, which pushes smoke back down against the Wasatch and triggers wood-burning restrictions, and you get a repair profile that other cities don’t share. We handle the flue issues that stock produces. Call (833) 497-1153. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Salt Lake City Homes Are Different
Salt Lake City’s winter inversions turn the valley into a trapped cold-air basin. When PM2.5 spikes, much of Salt Lake County lands under a no-burn red day, and wood burning gets restricted. That single fact changes what chimney work means here. Sweeping is as much about keeping a fireplace legally burnable and clean-burning on the few allowed days as it is about fire safety. Techs routinely find stoves that sat through a season or two of red-air days with glazed creosote and cracked refractory panels.
The housing splits along the same lines as the terrain. Down in the core neighborhoods, you’re working on century-old masonry and clay tile, which means hand tools and a careful eye. Out on the east and south benches, the 1950s to 70s ranch homes carry factory-built metal fireplaces and prefab chimney chases, and those take different tooling entirely. Cold, dry winters and heavy snowpack in the Wasatch concentrate creosote-producing burning into a short season. That makes smoke output a public-health issue as well as a household one, and it means documentation of creosote levels and appliance condition actually matters to the county’s burn-status rules.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Salt Lake City Services
Two services account for most of the calls we get from Salt Lake City homeowners: keeping a flue clean and safe, and clearing the vent that dries every load of laundry in the house.
Chimney Sweep in Salt Lake City
A sweep in Salt Lake City is not a brush-and-go job. Because the burning season gets squeezed by inversion days, creosote builds differently here, and glazed deposits are common in stoves that sat unused. We inspect the flue, remove what’s there, and document the creosote level and appliance condition so you know which days you can burn and which ones the county restricts. If you’ve been told you need a liner, the camera evidence goes to you, not just to us. Book Chimney Sweep in Salt Lake City before the first red-air day of the season, not after.
Dryer Vent Cleaning in Salt Lake City
Salt Lake City homes tend to have long dryer runs through cold exterior walls and basement ceilings, and lint packs where the duct sags. That’s a fire hazard with its own risk profile, separate from the fireplace. We run the duct, pull the buildup out, and check that the vent actually exhausts the way it should. Two of the most overlooked fire hazards in one visit is a lot of why homeowners book both at once. Call us for Dryer Vent Cleaning in Salt Lake City and get the vent cleared before it reaches the point where the dryer runs hot.
Chimney Repair in Salt Lake City
Repair work in Salt Lake City usually starts with a flue that was built for coal or early wood and has spent decades handling a wood-stove insert it wasn’t designed for. The cold, dry winters and the short, hard burning season concentrate the stress, and the inversion rules mean appliances sit unused for stretches at a time. When they come back into use, cracked refractory panels and glazed creosote show up. Our Chimney Repair work covers the fixes that keep a century-old masonry chimney usable and a bench-area prefab safe. We install DuraFlex flexible liner systems and use HeatShield resurfacing because those are trade-grade materials, not off-the-shelf substitutes.
Chimney Liner Installation
Signs you need it
A cracked or spalled clay tile liner, a stove insert with no dedicated liner, or a camera inspection that shows gaps between flue sections is the usual signal in Salt Lake City’s older core.
What it costs in Salt Lake City
Liner installation typically runs $1,800 to $4,500, and the written estimate sets the final price.
How we do it
We measure and photograph the flue, size the liner to the appliance, then install and insulate it before sealing the top and base.
Chimney Crown Repair
Signs you need it
A crumbling or cracked concrete crown lets meltwater from Wasatch snowpack down into the masonry, which is why crown damage and water-damaged flues so often go together.
What it costs in Salt Lake City
Crown repair typically lands between $400 and $950, with the written estimate setting the final price.
How we do it
We remove the failed crown, rebuild the slope so water sheds away from the flue, and seal the joint at the chimney top.
What Chimney Repair Costs in Salt Lake City
| Item | Typical range in Salt Lake City |
|---|---|
| Chimney liner installation | $1,800 – $4,500 |
| Chimney crown repair | $400 – $950 |
| Chimney cap installation | $250 – $600 |
Do I really need a new liner, or is that an upsell?
You need one when the camera shows a cracked, gaps or missing tiles, or when an insert has no dedicated liner. We show you the footage and tell you plainly when a repair can safely wait.
Can chimney repair wait until spring in Salt Lake City?
Water damage and cracked crowns get worse through the snowmelt, so those are worth fixing before winter ends. A flue that’s structurally sound but showing light wear can usually wait. Call (833) 497-1153 for an exact quote – estimates are free.
Brands We Service in Salt Lake City
We source and install from a curated professional set: DuraFlex liner systems, HeatShield resurfacing, Gelco and Olympia Chimney components. These are the same materials chimney specialists rely on nationwide, and they’re what we specify because the pros do. Turnaround depends on what’s in stock at the supply house, and we’ll tell you the timing in the estimate. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Salt Lake City, UT
| Service | Typical range in Salt Lake City |
|---|---|
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $130 – $260 |
| Chimney cap installation | $250 – $600 |
| Chimney cap replacement | $250 – $600 |
| Chimney crown repair | $400 – $950 |
| Chimney flashing repair | $350 – $850 |
| Chimney liner installation | $1,800 – $4,500 |
| HeatShield resurfacing | $1,200 – $3,200 |
Price goes up in Salt Lake City for height and access on steep bench-side roofs, for a flue that needs a full liner rather than a spot repair, and for masonry that’s taken on water and needs resurfacing. Everything is flat-priced from the written estimate, agreed before booking, with camera inspection and a photo report included. Nothing gets recommended without evidence you can see for yourself.
Neighborhoods We Serve in Salt Lake City
We work across Salt Lake City, from the dense brick streets of the older core out to the ranch homes on the east and south benches. The response time is the same across the city rather than varying block by block. Prefab chimney chases on the benches need different tooling than the masonry flues in the core, so it helps to say which part of town you’re in when you call.
- Avenues
- Sugar House
- Capitol Hill
- Liberty Wells
Service Area – Cities Near Salt Lake City
Salt Lake City sits in the middle of a run of communities with similar housing stock and the same inversion-season burn restrictions. If you’re just outside the city line, we cover the surrounding area too. Homeowners in South Salt Lake, UT, Murray, UT, Millcreek, UT and Holladay, UT get the same sweep-and-repair scope, the same documentation and the same upfront pricing as Salt Lake City addresses.
Serving Salt Lake City, UT – Our Local Coverage Area
We serve Salt Lake City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Salt Lake City
Yes. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm; we’re closed Saturday. A call outside dispatch hours gets booked into the next opening. Call (833) 497-1153 for an exact quote – estimates are free.
Often, yes, especially for relining or structural masonry repair. Your city building department sets the requirement, so ask before the work is booked and we’ll work with whatever the inspection needs.
Yes. Salt Lake City is a core part of our service area, along with the surrounding communities on the Wasatch Front. If you’re unsure whether your address is covered, call and tell us where you are.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Salt Lake City Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jason Meyer"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Jodi Miller"No issues with the actual work. I did have to call twice to get the invoice emailed to me, which was mildly annoying. The repair itself has been fine."
- Elena Martinez