Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Holladay
If your wood stove carries the heat through a Holladay winter, the sweep schedule you follow matters more than it does almost anywhere else in the valley. We work on chimneys across Holladay, from the mid-century ranches off Holladay Boulevard to the older cottages near the old town center, and we plan every visit around how you actually burn. Call (833) 497-1153 and we’ll book a sweep. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
A chimney sweep here is not a quick brush-and-go. Holladay sits at the base of the Wasatch Range, where cold air pools in the Salt Lake Valley and winter inversions trap PM2.5. That means burning habits swing hard from one household to the next, and so does creosote loading. A stove pushed as primary heat builds far more than a decorative fireplace used a few evenings a month. We sweep for what’s really in the flue, and we’ll tell you honestly how often yours needs it.
Why Holladay Homeowners Call Forge Chimney Cleaning for Chimney Sweep
Holladay homeowners tend to know their houses well, and they notice when a sweep crew rushes the job. Our technicians have up to 15 years of experience, and we sweep, repair, and restore rather than clean and leave. That matters in a town where so many flues are original clay tile from the 1950s through the 70s. A brush pass through an unlined or cracked liner can leave you thinking you’re covered when you aren’t.
We bring trade-grade materials to the work, not off-the-shelf substitutes. When a sweep turns up glazed creosote or a spalled crown, we can recommend and install the right fix on the same visit plan, whether that’s a DuraFlex liner system or HeatShield resurfacing. Most sweep-only outfits hand you a business card for a mason and leave. We don’t have to.
We also know how this valley burns. On a red-burn day, we get calls from Holladay homeowners who can’t light the stove but still smell smoke in the house. That smell is usually a blocked or cracked flue or a failing cap, not the fire itself. Knowing the difference up front saves you a wasted visit and points straight at the real repair.
Rural Edges and Wood Stoves as Primary Heat
The properties around Holladay’s rural edges and larger lots often run a wood stove as the main heat source through a long cold season, not as backup. Those stoves load creosote faster than a fireplace in a suburban split-level, and the safe sweeping interval shortens accordingly. Where a seasonal burner might get swept once a year, a primary-heat stove often needs it partway through the burn season too. We’ll help you set a realistic schedule instead of guessing.
Where Holladay Customers Reach Us
We cover the neighborhoods around Holladay Boulevard and Walker Lane, plus the streets up toward the Wasatch foothills. Distance matters less than what’s in the flue, but we plan routes so a Holladay sweep doesn’t mean a long wait. Booking ahead for the fall keeps you on schedule before the first hard freeze.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Holladay
Chimney Services in Holladay start with a real inspection of what your stove and flue are doing, because the housing stock here is dominated by 1950s to 1970s ranches and split-levels with original masonry fireplaces and clay-tile flues that have often never been relined. A typical annual sweep in Holladay runs $150 to $290, and a Level 2 inspection with camera work runs $200 to $400. On these homes, a wood stove running as primary heat through a long Wasatch cold season often builds third-degree creosote, a tar glaze a brush simply smears. A qualified local sweep typically performs a Level 2 inspection, rotary-glazes the flue down with poly or chain tooling, checks the smoke chamber, damper and chimney crown for spalling, then coaches you on burn temperature and air settings to slow the next buildup.
Creosote and Soot Removal
Third-degree creosote is the main event on a Holladay wood-stove flue, and it does not come off with a standard brush. It’s a hardened tar glaze that needs rotary tooling to break down, and it’s the reason a basic pass can leave you with a chimney that looks clean but isn’t. Soot removal is the lighter side of the same job, and we handle both together so nothing gets left behind.

Fireplace and Stove Cleaning
Cleaning the firebox, glass, and surrounding masonry keeps a working stove running the way it should through the cold months. In Holladay’s older masonry fireplaces, we also check the damper and smoke shelf, where ash and creosote collect and quietly cut your draft. It’s a small part of the visit and often the difference between a stove that draws well and one that smokes into the room.

Chimney Sweep Certified in Holladay
A Chimney Sweep Certified in Holladay means more than a clean brush and a drop cloth, given how many properties here run a wood stove hard from November through March. Our technicians have up to 15 years of experience and use professional-grade tooling that fits the job at hand. A Level 1 inspection runs as part of a routine sweep, and a Level 2 with camera work is what to book when you’ve changed fuels, added a stove, or bought a house with an unknown flue history.
Level 1 and Level 2 Inspections
A Level 1 inspection covers what’s visible without special access and suits a stove you know well and burn every year. A Level 2 adds a camera-assisted look at the flue interior, which is the only way to see cracks and offset sections hidden inside original clay tile. In Holladay’s 1950s to 70s ranches, those hidden defects often show up only when the fire is lit, which is exactly when you don’t want to discover them.
Narrow and Offset Flues in Old-Town Cottages
The older pre-1940 cottages near Holladay’s old town center have narrow, offset flues that standard straight rods can’t navigate. Those jobs call for specialized flexible and offset rods and a camera-assisted Level 2 inspection rather than a routine brush. It’s a slower sweep, and it’s the only way to actually reach the whole flue.
Trusted Brands We Service in Holladay
We specify DuraFlex liner systems and HeatShield resurfacing because those are the materials top chimney specialists rely on nationwide, and they hold up on the original clay-tile flues common across Holladay. We also work with Gelco and Olympia Chimney components on caps, dampers, and related parts. We don’t claim to stock parts locally or carry them on a truck. Instead, we source the right professional-grade material for your job through trade supply channels rather than hardware-store patchwork, which keeps turnaround reasonable and the result built to last. Where a sweep turns into a reline or a crown repair, that supply access is what lets us do the job properly instead of handing you off to someone else.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Holladay Homes
- Third-degree creosote misread as ordinary soot. A wood-stove flue pushed hard through a Holladay cold season builds a tar glaze that a basic brush pass smears rather than removes. That leaves a flammable layer behind and a homeowner who thinks the sweep did its job.
- Original clay-tile liners left un-inspected. Many 1950s to 70s Holladay ranches still have their first liner, with cracks and offset sections that only show up under a camera or when the fire is actually lit. A Level 2 inspection is the only reliable way to catch them.
- Burning straight through Salt Lake County no-burn red days. Inversion days push PM2.5 to the point where wood burning is restricted, and a stove pushed anyway loads creosote faster and leaves the chimney overdue at a shorter safe interval. We’ll help you track the forecast so you don’t find out the hard way.
- Blocked or failing caps and cracks on a no-burn day. Holladay homeowners who can’t light the stove but still smell smoke usually have a blocked or cracked flue or a failing cap, not a fire problem. A sweep plus a camera look pins down the actual cause.
Pricing for Chimney Sweep in Holladay, UT
A typical annual chimney sweep in Holladay runs $150 to $290, and a Level 2 inspection with camera work runs $200 to $400. Creosote that needs rotary tooling to break down, or an offset flue in an old-town cottage that takes flexible rods and more time, sits toward the higher end. When a sweep uncovers a liner that needs relining with DuraFlex or resurfacing with HeatShield, we give you the repair estimate in writing before any of that work is booked. Prices are per job, set by that written estimate, and the estimate itself is free. We won’t quote a repair off a quick glance at the firebox. You get a clear number tied to what the camera actually found, and you decide when to schedule it.
We Also Serve Cities Near Holladay
We serve Holladay and the towns around it, including Millcreek, Murray, Sandy, and Midvale. If you’re just outside the Holladay line, we’ll still take the call and book you a sweep. And if your chimney needs more than cleaning, our chimney sweep team also handles repair and relining, so one company can take it from inspection through the fix.
Serving Holladay, UT – Our Local Coverage Area
We serve Holladay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Holladay
A stove that smells like smoke on a no-burn day usually has a blocked or cracked flue or a failing cap, so the smoke backs into the room instead of drafting out. The fire being off just makes the source obvious. Book a Level 2 inspection with camera work so we can see inside the flue and pin down the cause. Call (833) 497-1153 for a free estimate.
A wood stove run as primary heat in Holladay often needs sweeping more than once a burn season, while a fireplace used a few times a week can usually go once a year. Long cold Wasatch winters and heavy loading shorten the safe interval. Once we see your flue and burning habits, we’ll set a realistic schedule. Call (833) 497-1153 for a free estimate.
Yes, because those cottages have narrow, offset flues that standard straight rods can’t navigate. They take specialized flexible and offset rods plus a camera-assisted Level 2 inspection rather than a routine brush job. It’s a slower sweep, and it’s the only way to reach the whole flue. Call (833) 497-1153 for a free estimate.
Third-degree creosote is a hardened tar glaze that a standard brush smears rather than removes. Rotary tooling with poly or chain heads breaks it down instead. On a Holladay wood-stove flue with years of heavy burning, that glazed layer is common and it’s a real fire hazard if left. Call (833) 497-1153 for a free estimate.
Yes, we help Holladay homeowners read Salt Lake County’s wood-burning forecast so they know when no-burn red days are in effect. Respecting those days slows creosote loading and keeps you from being overdue at a shorter interval. We’ll walk you through the forecast and what to do with the stove on a restricted day. Call (833) 497-1153 for a free estimate.
Call (833) 497-1153 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Forge Chimney Cleaning.