Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Murray, UT
We provide independent Gelco chimney cleaning, inspection and repair across Murray, UT, and we’re not affiliated with or authorized by the manufacturer. What makes our Gelco work different here is context: almost every Gelco insert and log set we see in Murray is sitting in an original mid-century flue that was never sized for it, so we service the whole fire system, not just the appliance. Call (833) 497-1153 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm.

Why Murray Residents Choose Us for Gelco Service
Gelco equipment is straightforward to a technician who works on it regularly and frustrating to one who doesn’t. The glass door and screen assemblies, the adjustable air controls, the venting and liner components used on insert retrofits – each has its own wear pattern, and knowing those patterns saves you from being sold a replacement you don’t need.
Murray homeowners call us because we work on Gelco fireplace inserts, gas log sets and venting every season as an independent shop. We specify genuine Gelco gaskets, glass, dampers and air-control hardware where those parts are still available, and quality equivalents that fit properly for standard-size screens, caps and venting pieces. Nothing gets forced to fit because it happened to be on hand.
Scheduling is simple. We answer 24/7 and dispatch technicians from 7am to 7pm, Sunday through Friday. A call that lands outside dispatch hours gets booked into the next opening. Our technicians have up to 15 years of experience, and we’ll tell you plainly when work can wait, because a chimney that’s four seasons overdue for a sweep is the more pressing job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Murray
These are the issues we run into most often on Gelco equipment in Murray, and each one ties back to how homes here were built and heated.
- Soot-caked fireboxes behind Gelco inserts in undersized flues. A Gelco insert installed into an original clay-tile flue that was never sized for a modern insert collects creosote in places a brush alone misses. In Murray’s 1950s to 1970s ranch homes, that’s the standard setup, not the exception. We sweep the flue properly and check whether the liner actually matches the appliance.
- Seized or warped dampers and air controls on older Gelco inserts. Heavy burning from November through March, plus inversion-season backdrafting along the Wasatch bench, works that hardware hard. A damper that won’t seat or an air control stuck open changes how the fire burns and how fast glaze forms on the flue walls.
- Failed gaskets and door seals on Gelco units. When a glass-door gasket hardens or splits, secondary air leaks in, burn efficiency drops and soot builds on the glass within days of a cleaning. It’s a small part with an outsized effect on draft.
- Corroded or loose venting at Gelco gas logs dropped into 1990s conversions. Plenty of Murray fireplaces were switched to gas in the 1990s with a Gelco log set and no liner sweep beforehand. Loose vent connections and soot-caked flue walls turn up behind those installations.
- Missing or damaged caps above Gelco installs. A cap takes the weather hit so the firebox doesn’t. These are common findings on Murray roofs and are simple to correct once they’re identified.
Gelco Service in Murray: What Local Conditions Mean for Your Equipment
Here’s the part a generic Gelco or Murray page will never tell you. In older subdivisions off State Street, we regularly find fireplaces converted to gas in the 1990s that still hide soot-caked original flues. A Gelco gas log set can look perfectly fine from the hearth, flame steady and glass clean, while the chimney behind it has never once been swept. That matters because no new liner can go in until the flue is clean, and a liner is often exactly what the appliance needs.
Layer on Murray’s cold, snowy winters and the sharp inversion season in the Salt Lake Valley: fireplaces here see heavy use from November through March, which accelerates creosote buildup and makes annual cleaning genuinely necessary rather than optional. The combination of a hidden flue and a long burning season is why we push for camera inspection and a Level 2 inspection whenever a Gelco log set or insert is involved. You see what we see, on the screen, before anything is recommended.
Gelco Models & Products We Service in Murray
We work on Gelco wood-burning fireplace inserts with glass doors and adjustable air controls, Gelco gas log sets and gas fireplace inserts with remote or wall-switch ignition, Gelco glass door and screen assemblies for masonry fireboxes, and Gelco venting and liner components used with insert retrofits. Each of these gets a proper inspection tied to the firebox and flue behind it, since that’s where the real condition lives. Parts sourcing leans on genuine Gelco pieces where they hold up best, with quality aftermarket equivalents used for standard sizes when a genuine part is no longer available. Repair usually beats replacement on a sound Gelco insert or log set. Replacement is the honest call when the firebox or flue behind it is spalled or cracked. Fireplace insert work, Level 2 inspection and creosote removal are the three sub-services we handle most on Gelco units in Murray.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Murray
We price Gelco service per job, in writing, before any work starts. There is no fee to get an estimate, and no surprise line items after the fact. What drives cost on a Gelco job is the flue’s condition: how much creosote has built up, whether a Level 2 inspection is needed, whether gaskets, glass, dampers or air controls require parts, and whether relining or resurfacing is part of the recommendation. On a mid-century Murray ranch with a Gelco insert in the original clay-tile flue, the inspection often uncovers more than a sweep alone. Call (833) 497-1153 for an exact quote. Estimates are free.
Serving Murray, UT – Our Local Coverage Area
We serve Murray and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Murray
Yes. Gas conversion doesn’t clean the flue; it simply hides it. A Gelco log set can sit in front of an original flue that still holds decades of soot and creosote, and no liner work should ever go forward on that fouled surface. Call (833) 497-1153 and we’ll walk you through what an inspection would show.
Smoke spill on cold snaps usually means draft is compromised, and in Murray that’s most often a flue that’s undersized for the Gelco insert combined with creosote restricting the path. A dirty flue, a gasket leak or a damper that won’t seat all make it worse. Call (833) 497-1153 to book an inspection and see the flue on camera before anything else is done.
Sometimes. The clay tile needs to be sound, properly sized and genuinely clean before a modern insert can sit safely on top of it. On many 1950s to 1970s Murray homes the flue is undersized for the insert, and a DuraFlex liner sized to the appliance is the right answer. A camera inspection tells us which side of that line your chimney falls on. Call (833) 497-1153 for the estimate.
For most Murray homes, annual cleaning once a year ahead of the heating season. The November through March burn cycle plus the inversion season means creosote accumulates fast, and skipping a year lets glaze set in. Call (833) 497-1153 to book your sweep before the season turns.
Yes. Snow, freeze-thaw and the long cold season take a toll on caps and crowns above any appliance. A cracked crown lets water into the masonry; a missing cap lets animals and weather in. It’s a short part of the inspection and often the easiest fix on the whole job. Call (833) 497-1153 for a free estimate.
Service Areas Near Murray
We also serve homeowners in Salt Lake City, South Salt Lake, Millcreek, and nearby areas including Midvale and Holladay. If you’re in any of these communities and running a Gelco system, the same independent inspection applies. Learn more about our Gelco service, or read our full Murray coverage page.
Book Your Gelco Service in Murray Today
Whether your Gelco insert needs a proper sweep, a Level 2 inspection or a decision about relining, we’ll give you an honest answer based on what’s actually in your firebox and flue. Call (833) 497-1153 for your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Forge Chimney Cleaning.