Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Salt Lake City?
Chimney liner installation in Salt Lake City typically runs $2,400 to $5,800 for a full stainless reline, while a partial crown-and-flue rebuild usually lands at $1,200 to $3,800 depending on how much masonry has to come down. A straight liner in good condition may come in under $2,400; structural rebuilding pushes it much higher. Every number here is a starting range, and the written estimate is what sets the final price.
We’re Forge Chimney Cleaning, and liner and rebuild work is where the trade-grade materials actually matter. We specify DuraFlex liners, HeatShield resurfacing, and components from Gelco, Olympia Chimney, Famco, and Copperfield, because the pros do. Our technicians have up to 15 years of experience reading a flue and telling you honestly whether it needs a liner, a rebuild, or just a sweep and a crown.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items stack up for a typical Salt Lake City home. These are estimated ranges for 2026, not quotes. The written estimate after we see your flue is the number that matters.
| Line Item | Typical Estimated Range |
|---|---|
| Level 2 inspection (camera and scope) | $250 – $450 |
| Stainless flex reline, single-flue, standard height | $2,400 – $4,200 |
| Stainless reline with insulation and offset handling | $3,800 – $5,800 |
| HeatShield flue resurfacing (repair, not full reline) | $1,800 – $3,400 |
| Crown rebuild or repair | $650 – $1,600 |
| Partial masonry rebuild (upper flue section) | $1,200 – $3,800 |
| Full chimney rebuild, top to smoke chamber | $4,500 – $12,000 |
| New cap and top-sealing damper | $350 – $900 |
| Firebox repointing or repair | $800 – $2,200 |
What pushes the number up is almost always hidden until we look inside. A cracked clay tile liner from a long-ago chimney fire, an offset flue that needs a flexible system rather than straight pipe, or a crown that’s been pulling away from the masonry for years all add labor. On the lower end, a straight-shot flue with sound masonry and a working cap is the simplest, most affordable reline to do.
We don’t quote off a phone call. The kind of inspection that tells you whether you’re looking at a liner or a rebuild is the kind that needs a camera in the flue, and that’s why estimates are free and the written number comes after we’ve seen the inside of your chimney.
What Affects Chimney Liner & Rebuild Pricing in Salt Lake City
- Whether you need a reline or a resurface. A HeatShield resurfacing can restore a flue that doesn’t need full stainless, which usually costs less than a complete DuraFlex reline. Our technicians make that call with a camera, not a guess.
- Flue shape and offsets. A straight flue takes a straight liner. An offset, an oval flue, or a shared flue in an older Salt Lake City home needs ovalized or flexible components, and that adds time and material.
- Masonry condition. Salt Lake Valley winters are hard on brick and mortar. Freeze-thaw cycles work on the crown and the upper courses, so a chimney that’s weathered poorly on top often needs crown and masonry work before a liner goes in.
- Insulation and clearance. An insulated liner protects the flue from creosote condensing in cold weather, and our cold winter nights in the valley are exactly the conditions that cause it. Insulation adds cost but addresses the root of the problem.
- Heating appliance type. A wood-burning fireplace, a gas insert, and a wood stove each call for a different liner built for that flame and those temperatures. The wrong liner for the appliance is a common reason a chimney underperforms.
- Access and roof pitch. Steep roofs and awkward roof lines mean more setup and more hours on a ladder, and that’s part of the estimate. No one should be guessing their way across a steep pitch to save time.
How to Save on Chimney Liner & Rebuild
There’s no shortcut around proper materials, but there are ways to keep the job from growing. Catch the problem while it’s still a repair rather than a rebuild. A crown that’s cracked today is a much smaller job than a crown that’s let water into the masonry for several winters. The same goes for a flue that’s throwing creosote: get it swept before it turns into a liner job.
A few practical moves:
- Sweep before you reline. A clean flue lets us inspect accurately, and you don’t want to pay for a liner over unknown creosote.
- Do the crown while you’re up there. Combining crown work with a reline usually costs less than two separate visits to the roof.
- Fix the cap first. A missing or damaged cap lets rain and birds straight into the flue. A new cap is a small line item that prevents water-driven masonry damage.
- Ask for pictures. A camera view of your flue shows you exactly what’s driving the estimate. Ask us, and we’ll show you.
- Get the estimate in writing. Free estimates from Salt Lake City homeowners are standard with us; call for one rather than going with a verbal range that grows on the roof.
For a free, no-pressure estimate on a liner or rebuild, call (833) 497-1153. The number in writing after the inspection is what you’ll pay.
FAQs – Chimney Liner & Rebuild Cost
Is a chimney liner worth the cost in Salt Lake City?
For most homes, yes. A stainless reline in the $2,400 to $5,800 range replaces a cracked or unlined flue with a system that holds up to the heat and to our cold valley winters. The alternative is living with a flue that can leak smoke, compromise masonry, or worse. A liner protects the structure and gives the appliance a proper path for exhaust. Call (833) 497-1153 for an estimate tailored to your flue.
Is it cheaper to reline a chimney or rebuild it?
Relining is usually cheaper, often by a wide margin. A partial reline in the $2,400 to $5,800 range handles most damaged-flue cases without touching the masonry. A full rebuild in the $4,500 to $12,000 range is the answer only when the masonry itself is failing, not just the liner. An inspection tells you which situation you’re in. Call (833) 497-1153 and we’ll show you the evidence from your own flue.
How much does chimney liner installation cost in Salt Lake City?
Chimney liner installation in Salt Lake City typically ranges from $2,400 to $5,800. Simple straight relines fall on the lower end, while insulated systems, offset flues, and taller chimneys push toward the higher end. The price is set per job by the written estimate, and estimates are free. Call (833) 497-1153 for your number.
Can a chimney rebuild be done without replacing the whole chimney?
Often, yes. Many Salt Lake City chimneys only need the upper flue section rebuilt, which runs $1,200 to $3,800, or a crown rebuild in the $650 to $1,600 range. Full rebuilds are reserved for chimneys with failing masonry from top to bottom. Our technicians use a camera to see how far the damage goes before recommending anything. Call (833) 497-1153 to set up an inspection.
How long does a chimney liner installation take?
Most standard relines are a same-day job, typically a few hours from setup to cleanup. Rebuilds and jobs with hidden masonry damage can take longer, often a day or two, and we’ll tell you what to plan for before we start. Same-day service is available for many relines. Call (833) 497-1153. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Does a chimney liner need to be inspected after installation?
Yes. A liner isn’t a set-and-forget item. We recommend a follow-up inspection after the season to check that the liner, connections, and cap are all doing their job. That follow-up is part of the same care a sweep would get. Call (833) 497-1153 to book an inspection or a sweep alongside your reline.
What’s the difference between a HeatShield resurface and a full reline?
A HeatShield resurface seals and smooths a flue that has minor cracking and doesn’t need a new stainless pipe, usually in the $1,800 to $3,400 range. A full reline installs a new DuraFlex stainless liner, in the $2,400 to $5,800 range, and is the right call when the original flue is failing structurally. Our technicians recommend one or the other based on what the camera shows. Call (833) 497-1153 for an honest read on yours.
Do you handle dryer vent cleaning as well as chimney work?
Yes. Dryer vent cleaning sits alongside our chimney sweep and chimney repair work, so we can address two of the most overlooked fire hazards in a home during the same visit. A clogged dryer vent and a neglected chimney both need professional attention on a regular schedule. Call (833) 497-1153 to schedule both, and we’ll confirm the details of your service.
Pricing reflects the Salt Lake City market as of 2026. Forge Chimney Cleaning offers free estimates – call (833) 497-1153.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Christine Lin"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Grace Chen"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Brian Norris